Hello All,

This tutorial is to give you full steps on how to charge your phone with with 6 volts battery. 

Requirements 

**A RESISTOR 
![1200px-Resistor.jpg](https://steemitimages.com/DQmZyB3c46Kw43v4uzUQVi1H7Bu6PWLnHTzNa8MXsctrJ5g/1200px-Resistor.jpg)


**A DIODE 
![1463710432.jpg](https://steemitimages.com/DQmcLsGyJGyBEydvuNBV28RjMbRCoukKfC3Qeozk9zw8yeh/1463710432.jpg)

**A 6 VOLTS BATTERY 
![sla-6v4-5_fullsize_540x540.jpg](https://steemitimages.com/DQmaafDzvJAJ3ap2FgTZze86bxHw1Fi1pP3ffLCBPvQbwEG/sla-6v4-5_fullsize_540x540.jpg)

**Red and black wire 
![bananaplugs007_lg.jpg](https://steemitimages.com/DQmb7GM6NxsZo46wf9ik5VZWUykwy5qG9z43axvAgxQyU7m/bananaplugs007_lg.jpg)




NOW, LET'S GET STARTED  
======================

I will make this as short as possible. 

First of all, Make sure your 6 volt battery is charged 

1. Cut the red wire into two equal part and connect the two terminals of the Resistor just like this -o-
The  Resistor is the "o"

2. Connect the cathode part of your Diode to the black wire and the anode part to the red wire. Check the picture above to know the cathode and the cathode part. 

3. Connect the black wire to the negative  part of the battery (which is also painted black) and the Red wire positive part (which is also painted red) 

4. Find a cord and cut it into two. Note the red and black wire in it and connect the red wire to the wire which the Resistor is connected to and the black wire to black wire connected to the battery. 

Note : make sure you tape all connections, you can use paper tape, I prefer that. 

After this, you can connect to your phone and yes!! 
Its charging. 

*This is tested and working 100% on xiaomi Mi max and infinix hot x551*

Feel free to ask questions.

Thanks For Reading My Post. Please follow, upvote @akeemqaz and don't forget to read my other post next time.