**ATTENTION !!!**
1. MAKE SURE THE DEVICE MUST BE SAME WITH THE USE ON THE VIDEO, VIVO Y15.
2. MAKE SURE THE MINIMUM BATTERY IS 80 PERCENT.
3. MAYBE THE FIRMWARE I GIVE IT IS NOT SUITABLE WITH YOUR DEVICE. YOU CAN FLASH USING ANOTHER VIVO Y15 FIRMWARE. THIS VIDEO IS MADE TO OVERCOME THE VIVO Y15 DEVICE IS TOTAL OFF AND NOT DETECTED ON COMPUTERS.
4. I AM NOT RESPONSIBLE FOR ALL DAMAGES THAT WERE CAUSED BY THIS TUTORIAL VIDEO.
>**PERHATIAN !!!**
>1. PASTIKAN PERANGKAT SAMA PERSIS DENGAN YANG DIGUNAKAN PADA VIDEO YAITU VIVO Y15.
>2. PASTIKAN BATERAI TELAH DICHARGE MINIMAL 80 PERSEN.
>3. KEMUNGKINAN FIRMWARE YANG SAYA BERIKAN TIDAK COCOK DENGAN PERANGKAT ANDA. ANDA BISA MEMFLASHING MENGGUNAKAN FIRMWARE VIVO Y15 YANG LAIN. VIDEO INI DITEKANKAN UNTUK MENGATASI PERANGKAT VIVO Y15 MATI TOTAL DAN TIDAK TERDETEKSI PADA KOMPUTER.
>4. SAYA TIDAK BERTANGGUNG JAWAB ATAS SEMUA KERUSAKAN YANG DIAKIBATKAN VIDEO TUTORIAL INI.

Vivo Y15 is one device that many people have.
Vivo Y15 is one of the devices that is easily and easily difficult when flashing.
In some cases there are those who succeed and some who fail.
The most fatal failure is when flashing firmware upgrade mode or Format All, because it has to flash Preloader where the Preloader mismatch will cause the Vivo Y15 to experience Hardbrick or Dead Boot.
So that when the power button is pressed it won't turn on, when it is connected to the charger there is no reaction, and when it is connected to the computer it is not detected.
>Vivo Y15 merupakan salah satu perangkat yang banyak dimiliki masyarakat.
Vivo Y15 termasuk salah satu perangkat yang gampang-gampang susah saat melakukan flashing.
Pada beberapa kasus ada yang berhasil dan ada juga yang gagal.
Kegagalan yang paling fatal adalah ketika melakukan flashing pada mode firmware upgrade atau Format All, karena harus memflashing Preloader dimana ketidak cocokan Preloader akan mengakibatkan perangkat Vivo Y15 mengalami Hardbrick atau Dead Boot.
Sehingga ketika tombol power ditekan tidak mau menyala, ketika dihubungkan dengan charger tidak ada reaksi, dan ketika dihubungkan dengan komputer tidak terdeteksi.

Following are the steps for flashing Vivo Y15 with the Test Point method.
>Berikut langkah-langkah memflashing Vivo Y15 dengan metode Test Point.

**EQUIPMENT:**
1. PC / Laptop.
2. Vivo Y15 device.
3. Solder.
4. Screwdriver +.
5. Jumper cable.
6. USB cable.
7. USB Driver : [http://www.mediafire.com/file/znd1ct6...](http://www.mediafire.com/file/znd1ct6n83nqbef/Driver_MT65xx_Android.rar/file)
8. Firmware + SP Flash tool + Image Test Point Vivo Y15 : [http://www.mediafire.com/file/5dw5nku...](http://www.mediafire.com/file/5dw5nkup8sy0r0l/Vivo_Y15_Unbrick_Test_Point.rar/file)
>**PERALATAN :**
>1. PC/Laptop.
>2. Perangkat Vivo Y15.
>3. Solder.
>4. Obeng +.
>5. Kabel jumper.
>6. Kabel USB.
>7. USB Driver : [http://www.mediafire.com/file/znd1ct6...](http://www.mediafire.com/file/znd1ct6n83nqbef/Driver_MT65xx_Android.rar/file)
>8. Firmware + SP Flash tool + Gambar Test Point Vivo Y15 : [http://www.mediafire.com/file/5dw5nku...](http://www.mediafire.com/file/5dw5nkup8sy0r0l/Vivo_Y15_Unbrick_Test_Point.rar/file)

Steps:

1. Download the USB Driver and Firmware + SP Flash tool.
2. Install USB Driver.
3. Extract firmware + SP Flash tool + Image Test Point Y15.
password = pemudadesa
extract using Winrar.
4. Take apart the Vivo Y15 device, then jumpers on the Test Point pin according to the picture.
5. Open the SP Flash tool SP_Flash_Tool_v5.1640_Win folder and run "Flash_tool.exe".
6. Click on scatter loading and navigate to the firmware folder that has been downloaded. Select "MT6582_Android_scatter.txt".
7. Click on Options - Options - Download. Under "DA DL All With Checksum". check "USB Checksum" and "Storage Checksum".
8. In the download mode, select "Format All + Download"
9. Click on "Download".
10. Install the battery in the Vivo Y15 device and hold it in place to keep the battery connected.
11. Connect the USB cable on the Vivo Y15 device. If the driver is installed correctly, the flashing process will run.
12. Wait until the flashing process is complete.
13. Remove the USB cable, remove the battery, and remove the Test Point jumper. Press the power button to turn on the device.
14. The device is ready to use.
>**Langkah-langkah :**

>1. Download USB Driver dan Firmware + SP Flash tool.
>2. Install USB Driver.
>3. Ekstrak firmware + SP Flash tool + Gambar Test Point Y15.
password = pemudadesa
ekstrak menggunakan Winrar.
>4. Bongkar perangkat Vivo Y15, kemudian jumper pada pin Test Point sesuai gambar.
>5. Buka folder SP Flash tool SP_Flash_Tool_v5.1640_Win dan jalankan "Flash_tool.exe".
>6. Klik pada scatter loading dan arahkan ke folder firmware yang telah di download. Pilih "MT6582_Android_scatter.txt".
>7. Klik pada Option - Option - Download. Pada "DA DL All With Checksum". centang pada "USB Checksum" dan "Storage Checksum".
>8. Pada download mode, pilih "Format All + Download"
>9. Klik pada "Download".
>10. Pasang baterai pada perangkat Vivo Y15 dan tahan agar baterai tetap terhubung.
>11. Hubungkan kabel USB pada perangkat Vivo Y15. Jika driver diinstall dengan benar, maka proses flashing akan berjalan.
>12. Tunggu sampai proses flashing selesai.
>13. Lepas kabel USB, lepas baterai, dan lepas jumper Test Point. Tekan tombol power untuk menyalakan perangkat.
>14. Perangkat siap digunakan.

https://youtu.be/xoB3tnzX1vk